Pro Audio Files Logo Pro Audio Files

Elevate Your Ears Become a Member

5 Things to Listen for When Choosing a Microphone

Article Content

Purchasing a microphone can be daunting. Even inexpensive microphones cost hundreds of dollars, and high-end microphones cost thousands. On top of that, there are a lot of options on the market and each one is a little different than the next.

So how do we know what to pick? We want to pick a microphone that is going to best suit our source. If we’re recording upright bass we want something that has a really clear transient response, a tone curve that’s a bit more receptive to the low end, a fairly wide pickup pattern, low proximity effect, and either very little component saturation or something that puts a little grit into it, depending on what we want.

Now, that all might have sounded a bit overwhelming to you — but don’t worry.

I’m going to explain what all of those things mean in detail so you know exactly what to listen for in a microphone. Also, I’ll be listing a few of my mic choices for various budget ranges at the end of the article.

1. Tone Curve

Let’s start with tone curve because it’s the most obvious characteristic. Some microphones have a very neutral tone like the Audio Technica 4033a. Some microphones are very dark, meaning the top end of the frequency spectrum is rolled off, such as the Coles 4038. Some microphones have an upper midrange push like the Manley Reference C.

Every mic has its own tone. Many strive for a flat response, as that yields the most accurate representation of the source, and others deliberately give a bit of love to certain frequency ranges because they’re intended for specific purposes. For example, the Earthworks QTC is used frequently in classical music to pick up the exact sound of the instruments, while the AKG D112 is used primarily on kick drums because its tone curve is strongly weighted to the low end.

Match your mic to the source and intentions, and know the sound of your source. If it’s a bright acoustic guitar, maybe the top end needs to be tamed a bit. Pick a mic that will match that formula. A Neumann U47 rolls off the top end and would be a great choice to get a bright acoustic guitar feeling full and lush by taming brighter tones and showing a little love to the low end.

2. Transient Response

People attribute clarity to tone curve, but a big piece of that puzzle is how receptive a microphone is to the transients of a sound. Transients are the attack part of a sound envelope. For example, the consonants in a vocal contain transients. The crack of a drum is a transient. The pluck of a string or the strum of a guitar are transients.

Sometimes we want fast transient responses; vocals, acoustic guitars, room mics, drum overheads and upright bass benefit from having defined attack tones. Sometimes we want something that rounds the transients out like close mics on drums or overheads that are close to the kit. Transient response tends to go hand in hand with SPL ratings  usually, mics with fast transient responses don’t fair as well right up on loud sources while slower mics tend to do well with high SPLs. For example, the JZ Black Hole is a perfect vocal mic when placed six to twelve inches from the singer, but an Electro-Voice RE20 might be better if the vocalist is going to press right up on the mic and belt out super loudly.

As a general rule of thumb, the heavier the capsule, the slower the transient response. Large diaphragm dynamic mics tend to be the slowest while small diaphragm condensers and ribbons are generally fastest.

3. Pickup Pattern

Pickup pattern is nice and straightforward. This feature describes where the sound is picked up and where the sound is rejected. For example, an omnidirectional microphone picks up sound from all directions. A cardioid pickup grabs sound in front of the mic and rejects sound from behind and above. A figure-8 pickup grabs sound from directly in front and behind, but rejects sound from the sides, above and below.

The only consideration is that not all pickup patterns share the same breadth. Some cardioid mics have a fairly wide pickup acting almost like a half omnidirectional (cardioid small-diaphragm condensers tend to have this type of pickup), whereas some cardioid pickups are so narrow they only catch sources that are directly aligned with the front of the capsule (this is called a hypercardioid pickup and is used mainly for capturing dialogue for on-location sound). Figure-8 mics tend to be pretty directional, but there are a few exceptions. The Royer 122 active ribbon microphone is a very wide figure-8 pickup and there are perhaps a few other examples but this is pretty rare.

For most sources, you can’t really go wrong with cardioid pickups. If you want to grab more of the room sound then omnidirectional mics are a good choice. Figure-8’s can be used for more advanced miking techniques like Mid-Side or Blumlein captures, or styles of capture where the mic is placed near the sound hole but purposefully tilted away to catch more of the textural elements of the instrument. The other place figure-8 mics sound really good is when the interaction of the source with the reflective boundary is appealing, like drum overheads in a cool sounding room, or piano with the lid removed when you want to capture some of the “air” of the space while still having the mic close to the sound hole.

ADVERTISEMENT

4. Proximity Effect

Directional microphones exhibit something called proximity effect. As the microphone is placed closer to the source, more low end builds up in the capture. This can be a fantastic tool or terrible nuisance. The degree of proximity effect is based on the type of capsule and the means in which the air pressure is ported, with every mic build yielding slightly different results.

Ribbon mics tend to exhibit the most proximity effect, dynamic cardioid mics tend to have very little, and omnidirectional condensers have none at all. Proximity effect is not a good thing or a bad thing — it’s simply a thing. Used correctly it can be a great tool for adding weight to a sound in place of an EQ. Used incorrectly it can add a lot of mud and boominess that can be difficult to remove.

5. Saturation (Personality)

This is the most difficult category to ascertain because it involves a lot of subtlety and because the effect is dynamic. There’s a degree of subjectivity because the component saturation (or color) of the mic will change with amplitude and frequency. And because this is harmonic distribution rather than straight-out tone curve, it’s easier to think of saturation as the “personality” of the microphone.

When I think of the personality of a U47, I think of a “warm” or “thick” and almost “whooley” sound that shows love to the low range and has a “dustiness” to the top end. Contrast this with a JZ Black Hole which has an “open” and “clear” sound that captures things cleanly and has just a bit of “sparkle” in the top end. The harmonics of a U47 are very concentrated below the 400 Hz range and has what I ambiguously describe as an “orange-colored” tone in the upper-mids. A Neumann U87 has concentrated harmonics between 1-2 kHz which makes it sound very “assertive” and tends to pull sources toward the front of a mix, while the upper-mids are a bit “gritty”, and the top end (if well-maintained) is “round and shiny”. Telefunken ELA M251’s have a particularly unique and wonderful almost “smeary” texture (in a good way) in the broad top end. The JZ Black Hole has very evenly distributed harmonics throughout the frequency spectrum which are like the sonic equivalent of looking through the Fiji Ocean  — it’s a beautiful sound that’s hard to quantify.

What I love about the color of a microphone is that it’s up to interpretation and I feel is best described using emotional language. And it’s in this aspect that picking microphones becomes more art than science. There’s simply a difference in emotion when using a U47 to record strings versus using an Earthworks QTC. And picking the right emotion for the song is how we make our art.

Matt’s Mics

Here are some microphones I really love, and why (along with some helpful descriptions):

JZ Black Hole BH1S

This is a mic with a very even tone curve, very fast transient response, flexible pickup patterns, typical proximity effect for a condenser, and a very evenly distributed harmonic signature with low saturation. Open, clean, clear and sparkly are words I would use with this mic. I love this mic on vocals (particularly male), acoustic guitar, upright bass, and sounds good on basically any melodic source. I’m only hesitant to use this mic on anything particularly transient heavy or overly bright or thin.

On a personal note, this is one of my favorite high-end mics and one that I highly recommend.



JZ Microphones Black Hole BH1S Review (+ What to Listen for When Evaluating a Mic)

JZ Microphones Black Hole BH1S Review (+ What to Listen for When Evaluating a Mic)

ADVERTISEMENT


Neumann M147

A great counterpart to the JZ, this mic has a unique tone curve that bumps the upper-mids, dips the low treble, bumps 10k, and rolls off fast. The transient response is a bit slower and the cardioid pickup is standard but there is a bit more of a pronounced proximity effect. The color of the mic has a bit of density in the low range and a little gruffness in the upper-mids and a touch of smear in the top end. Thick, vibey, warm and weighty are words I would use for this mic. This mic is great for adding body to a thin vocal or balancing out a bright source, and sounds incredible on bass cab, rhythm guitar and kick drum.

Neumann U87

The quintessential “workhorse” mic. The 87 handles proximity exceptionally well and has a wider cardioid pickup pattern than a typical condenser. The transient response is pretty even and about what one should expect from a typical condenser. The U87 is fairly flat in actual frequency response but the component saturation does some unique things. The harmonics seem to collect a bit in the midrange between about 1k and 2k which brings attention to that range and makes sources feel more “forward” than other mics typically would. Older models also tend to have a “grittier” upper-mid and top end where newer models are much “smoother” and have a bit more “sheen”. I would describe this mic as assertive, crisp and a bit edgy. The rich capture makes it useful on anything but can make midrange sources a bit harsh.

Quiztones for iOS EQ ear training screen

Ready to elevate your ears?

It doesn’t have to take years to train your ears.

Get started today — and you’ll be amazed at how quickly using Quiztones for just a few minutes a day will improve your mixes, recordings, and productions!

Sony C800-G

The “flagship mic”. To be honest, this is not an “always sounds great” kind of mic for me. It’s an even-toned mic with a bit of lift to the top and bottom end, a very fast transient response, and the cardioid pattern is pretty typical with a very pronounced proximity effect that not only bumps the low end but also noticeably changes the texture of the top end to a more saturated sound. The C800-G has very rich harmonics particularly around 4-7k, which is great on softer or duller sources but can make brighter, harder sources sound very edgy and piercing. I would describe the C800-G as present, open and solid sounding. This is a mic that will make any smooth or soft sound stand up brilliantly in a mix, and make any harsh sound an absolute nightmare to mix.

Electro-Voice RE20

My favorite large diaphragm dynamic. The RE20 has a tone curve which rolls off the top end and bumps the 400 Hz range. It has a notably slow transient response, fairly tight unidirectional pickup (wide in front of the capsule but very good side rejection) and it handles proximity about as good as any directional mic possibly can. The saturation curve of this mic is very even relative to amplitude because it’s basically always there. This mic kind of sounds like it’s in a cloud, but in a good way. This is a great mic to put right up on a source. You can press a vocalist’s face to it and still get a very usable sound. I would describe this mic as very thick and rounded. It sounds phenomenal on bass and a guitar cab, inside kick mic, snare, toms and certain vocals. This is a character mic, for sure, but I dig it.

AEA RCA44

The “ribbon-iest” ribbon mic. When it comes to vibe, this mic is pretty unbeatable. In terms of frequency response, the RCA can be configured to have varying degrees of low end roll off to compensate for the proximity effect. In standard position, the tone curve accentuates the low end, dips out some of the upper-mids, and rolls off a lot of the top. The pickup pattern is, like any ribbon, fixed figure-8 with a pretty typical feature of having about 45 degrees on either end of neutral pickup. The proximity effect can vastly push the low end. The saturation curve seems to push energy toward the center midrange (600 Hz to 1.2 kHz). The top end is very textured making a chain like RCA44 > Pultec with big top end boost a really unique and cool sound. RCA44s are great as drum overheads or front of kit mic and make very cool kick drum mics if the placement is correct — too close to the kick is a no-no. They’re also great on extremely bright sources like horns or flutes. With the right context RCA44s make for unique character captures on any source from strings to guitar to vocals.

Slate VMS (Virtual Microphone System)

I want to mention this mic because it is so unique. The microphone itself provides an exceptionally neutral capture while software is implemented to recreate the sound of another mic of your choosing. In other words, you record with a very flat bland capture and then pick a U47, RCA44, or C800 software model and transform the capture into that sound.

The microphone itself is about as a flat as an EQ curve as you can get with a medium width polar pattern and pretty low proximity effect for a directional condenser. The transient response is fairly fast, not lightning quick but certainly not slow. And the saturation curve is basically non-existent. If you want to hear how important the component saturation is in the sound of a microphone, take a listen to how a source sounds without any! No magic and no personality.

But this is exactly what the software needs to do its thing. The software then faithfully replicates the tone curve, transient response, and component saturation of a variety of microphones. This makes it a really good microphone to have for any purpose, a great microphone for anyone learning the sound of different mics, and a great travel mic if you happen to be backpacking around recording God-knows-who or Lord-knows-where. I’d also highly recommend this mic if you are purchasing your first microphone and aren’t sure what is best, as one software module or another will surely work very well.



Slate Digital VIRTUAL MICROPHONE SYSTEM: The Future of Microphones

Slate Digital VIRTUAL MICROPHONE SYSTEM: The Future of Microphones


Guest